{_ComName}

SZMB-5 magnetoelectric speed sensor

Product Introduction

SZMB-5 -type magnetic speed sensors, angular displacement can be converted into an electrical signal for the counter. Non-contact will be able to measure a variety of magnetic materials such as: gears, impellers, with holes ( or slots , screws) disc ( or axis) speed and line speed.

Sensors have : small , robust and reliable , long life , no power and lubricants , etc., and general secondary instrument can match.

The main technical performance

Output waveforms: sine wave approximation (≥50r / min when )

Output signal amplitude : ≥300mA

                       Sensor core and the measured tip clearance δ = 0.5mm

                       Measured gear modulus m≥2

                       Materials electrical steel

Signal amplitude is proportional to the size and speed , and the iron core is inversely proportional to the size of the gap and the top gear , but do not meet the linear rule

Measuring range : (50-5000) Hz

Use Time: continuous use

Working conditions: temperature -20 ℃ -60 ℃; relative humidity ≤85%; non-corrosive gases

Output Type : X12K4P four-core plug

Dimensions : Diameter M22 * 1 Total length 84mm

The maximum length of the transmission line : 10m