Application of laser rangefinder
Release time：2019-12-07 Clicks：622
1. Bidding calculation (HVAC, electricity, cable, maintenance), measuring distance, area and / or volume.
2. Measure the height or width of buildings and other objects, if necessary, use triangulation
3. CAD calculation of built buildings and design drawings
4. Determine whether the sides of the room or object are truly vertical or completely parallel.
5. Parking structure
6. Check whether the new building meets the usage requirements
7. The size of the equipment or office space to help layout the office.
8. Determine the dimensions of the existing building without drawings.
9. Calculate the internal area / volume of a room or building.
10. Measure the length of space that cannot be measured with a tape measure or tape measure because of an obstacle in the middle.
Facilities: How Cranes Use Laser Rangefinders
11. Measure the roof distance to determine the type of lifter required for roof equipment lifting.
12. Measure the ceiling height to determine the height of all lifting equipment.
13. Quickly calculate the length of steel rope required by crane
14. Set the collision detection distance of the crane. It is not necessary for two people to measure with a tape measure while standing on two lifts.
15. Measuring track span of crane
Facilities: How to use laser rangefinder for fire safety
16. Measure the installation distance (including ceiling height) of emergency lights, sprinklers, and fire extinguishers.
17. Accurately size the room to determine the chemical concentration of the clean gas fire extinguishing system.
18. Measure the distance between the fire fighting equipment (fire extinguisher, fire blanket, etc.) and the machine.
19. Measure the water level in the fire extinguisher.
Facilities: Usage of laser rangefinder elsewhere
20. Floor stand to help install large telecommunications room.
21. Measure room size to calculate paint usage.
22. Measure the size of the room to calculate the amount of floor covering material.
23. Measure the height to select the right ladder.
24. Record the location of the accumulated or leaking water found by the infrared camera or infrared thermometer.
Electricity: Measurement method of cable laser rangefinder
25. Measure the wiring length of the cable or wire.
26. Measure the linear length (feet / meter) of the conduit to be installed.
27. Measure the height of the high-voltage line to check whether the height above the ground meets the requirements.
28. Calculate the total length of the harness
29. Measure the voltage drop (voltage part) to calculate the required distance.
30. Measure the depth and distance of the underground conduit.
31. Determine the length of the remaining wire in your hand.
32. Measure the distance between underground cables and various landmarks or obstacles / dangerous objects.
33. When using a transmitter / sensor tool to locate underground cables, use a rangefinder to track the cable's direction.
34. Use the A-frame method to locate the fault point of the underground cable. You can accurately determine the distance between the fault point and the starting point without using a tape measure or a tape measure.
Power: laser rangefinder for ceiling / floor
35. Measure the distance from hard-to-reach objects in the ceiling to determine the direction of the cable at a high place.
36. Measure the height and area of the ceiling to determine the length of the ceiling installation pole and lamp holder.
37. Distance measurement in the mezzanine of cabling floor.
Electricity: using laser rangefinders to ensure safety
38. Measure distances to power system equipment (transformers, etc.) to determine electrical safety / arc protection distances and conduct power studies.
Power: Other applications of laser rangefinder
39. Measure the installation distance of the disconnector.
40. Measure the distance between the electrodes.
41. Measure the installation distance between the wall sockets.
42. Determine where to place the power outlet.
43. Measure whether the area of the power distribution room meets the requirements.
Industrial maintenance: Conveyor belt using laser rangefinder
44. Determine the length of the conveyor (when installed)
45. Calculate the conveyor capacity based on the length.
Industrial Maintenance: The Role of Laser Rangefinders
46. Measure the equipment distance to estimate the heat load.
47. Determine the ventilation requirements (air flow) of the equipment.
Industrial maintenance: Laser rangefinder to check tank liquid height
48. Check the accuracy of the liquid level and level transmitter in the tank.
49. Measure the water level at the power plant inlet. Industrial maintenance: laser rangefinder other uses
50. Check the calibration of the product distance sensor.
