How to maintain the color light box?
Release time：2019-12-03 Clicks：766
a) Make sure that the power source used in the standard light source box is stable 220V ± 20V and the power supply is good, to prevent the unstable voltage and damage the electronic equipment inside the light box, which affects the photometric and colorimetric work.
B) The standard has a damage current. When using it, care must be taken not to exceed this rated current to avoid accidents.
C) The standard light source box should be protected from external light as much as possible. If a company with a good condition does a good job, it should be designed in a dark room. In addition, no debris should be placed inside the light box.
D) The height of the standard light source box should not exceed 1 meter. If it is convenient for observation, it is also suitable for finding a good observation angle.
E) In the color sample detection, the color sample should be placed in the center of the light box. If there are multiple samples to compare, it should be tiled inside the light box side by side, taking care not to overlap.
F) Prevent the paint on the inner wall of the light box from being contaminated and peeled off, so as not to affect the observation environment.
G) Do not touch the bulbs with your hands. One of these bulbs can be burnt if the temperature is extremely high, and then the bulbs will be contaminated with grease, etc. to stain the bulbs, causing local heat dissipation and burnout.
H) Do not change the arrangement of the lamps to avoid affecting the uniformity of the light source distribution.
I) If the power line has a strange smell or the light source is faulty, the electrician should be notified in time for repair.
J) Clean and sanitary the light box.
